معلومات استشارية الحب
- إنضم
- 24 يوليو 2010
- المشاركات
- 4,328
- مستوى التفاعل
- 0
- النقاط
- 0
5000 كود للموبايل الصيني
[FONT="]السلام عليكم[/FONT][FONT="]
[/FONT][FONT="]ايكم معظم الاكواد الصينيهالجديده[/FONT][FONT="]
[/FONT][FONT="]يرجى[/FONT][FONT="]الانتباه لاستخدام هذهالاكواد[/FONT][FONT="]
taimor
rannatweb.Com
[/FONT][FONT="]
Factory code
*#66*#
[/FONT][FONT="]ـــــــــــــــــــــــــ ـــــــــــــــــــــــــ[/FONT][FONT="]ـــ[/FONT][FONT="]
Engineer code
*#3646633
[/FONT][FONT="]ـــــــــــــــــــــــــ ـــــــــــــــــــــــــ[/FONT][FONT="]ــــــــ[/FONT][FONT="]
Check Phone code
*#87#
[/FONT][FONT="]ـــــــــــــــــــــــــ ـــــــــــ[/FONT][FONT="]ـــــــــــــــــــــــ[/FONT][FONT="]
Games code
*#12345#
[/FONT][FONT="]ـــــــــــــــــــــــــ ـــــــــــــــــــــــــ[/FONT][FONT="]ــــــــ[/FONT][FONT="]
Default Language code
*#0000# + send
____________________
Arabic Language code
*#0966# + send
[/FONT][FONT="]اكواد الاجهزة الصينى[/FONT][FONT="]
*#66*# Set Factory Mode CONFIRMED *#8375# Show Software Version CONFIRMED*#1234# A2DP ACP Mode CONFIRMED *#1234# A2DP INT Mode CONFIRMED *#0000# + Send: Set Default Language CONFIRMED *#0007# + Send : Set Language to RussianCONFIRMED *#0033# + Send : Set Language to French CONFIRMED *#0034# + Send :Set Language to Spanish CONFIRMED *#0039# + Send : Set Language to ItalianCONFIRMED *#0044# + Send : Set Language to English CONFIRMED *#0049# + Send :Set Language to German CONFIRMED *#0066# + Send : Set Language to ThaiCONFIRMED *#0084# + Send : Set Language to Vietnamese CONFIRMED *#0966# + Send: Set Language to Arabic CONFIRMED========================================= ========= ===== *#19992006#---->phone reset(COPY D820 SAMSUNG) *#9426*357#----->COPY NOKIA 6280============================================== ==== ===== default user code:1122, 3344, 1234, 5678 Engineer mode: *#110*01# Factory mode: *#987# Enable COMport: *#110*01# -> Device -> Set UART -> PS Config -> UART1/115200Restore factory settings: *#987*99# LCD contrast: *#369# software version:*#800# software version: *#900# set default language: *#0000# Send set Englishlanguage: *#0044# Send set English language (new firmware): *#001# Send============================================== ==== ==== also ========== Servicecodes BenQ: software version: *#300# test mode: *#302*20040615# Service codesPantech: software version: *01763*79837# service menu: *01763*476# resetdefaults (phone/user code reset to default): *01763*737381# Service codes 3xx,5xx: software version: *#79# software version: *#837# Service codes VK200, VK2000,VK2010, VK2020, VK4000: software version: *#79# service menu: *#9998*8336#(hold #) reset defaults (phone/user code reset to default): *#9998*7328# (hold#) Service codes LG: software version: 2945#*# Service codes Sony-Ericsson:J100 software version: #82# Service codes Fly: 2040(i) reset defaults:*#987*99# Send MX200 reset defaults: *#987*99# Send MX200 software version:*#900# Send SL300m reset defaults: *#987*99# Send SL300m software version:*#900# Send SL500m reset defaults: *#987*99# Send SL500m software version:*#900# Send MP500 reset defaults: *#987*99# Send MP500 software version: *#900#Send Set language to English: *#0044# Set language to Russian: *#0007# Servicecodes Konka: C926 software version: *320# Send C926 set default language: *#0000#Send C926 set English language: *#0044# Send Service codes GStar: GM208(Chinese Nokea 6230+) engineering menu: *#66*# Set language to English: *#0044#Set language to Russian: *#0007# Service codes Motorola: Motofone F3 softwareversion: **9999* Send C113, C114, C115, C115i, C116, C117, C118 softwareversion: #02#* C138, C139, C140 software version: #02#* C155, C156, C157software version: #02#* C257, C261 software version: #02#* V171, V172, V******software version: #02#* V175, V176, V176 software version: #02#* C168, W220software version: *#**837# W208, W375 software version: #02#* ZTE Mobile:>1-*938*737381# 2- PHONE WILL DIPLAYED DONE 3- POWER OFF YOUR PHONE AND POWER ONAGAIN alcatel:>E205 unlocking phone code,only press***847# without simcard ==================================================
[/FONT][FONT="]تحت التجربة[/FONT][FONT="]
1-[/FONT][FONT="]لمعرفةالاصدار(#0000#*#0044[/FONT][FONT="]#*)
2-[/FONT][FONT="]درجة[/FONT][FONT="]وضوح الشاشهه(#369[/FONT][FONT="]#*)
3-[/FONT][FONT="]اعادةضبط[/FONT][FONT="]المصنع(#99*987[/FONT][FONT="]#*)
*#3646633
[/FONT][FONT="]ـــــــــــــــــــــــــ ـــــــــــــــــــــــــ[/FONT][FONT="]ــــــــ[/FONT][FONT="]
[/FONT][FONT="]كود فحص الهاتف[/FONT][FONT="]
*#87#
[/FONT][FONT="]ـــــــــــــــــــــــــ ـــــــــــ[/FONT][FONT="]ـــــــــــــــــــــــ[/FONT][FONT="]
[/FONT][FONT="]كود[/FONT][FONT="]الالعاب[/FONT][FONT="]
*#12345#
[/FONT][FONT="]ـــــــــــــــــــــــــ ـــــــــــــــــــــــــ[/FONT][FONT="]ــــــــ[/FONT][FONT="]
[/FONT][FONT="]اللغة الافترضية[/FONT][FONT="]
*#0000# + send
____________________
[/FONT][FONT="]اللغة[/FONT][FONT="]العربية[/FONT][FONT="]
*#0966# + send
______________________
[/FONT][FONT="]اللغة الصينية[/FONT][FONT="]
*#0084# + send
*#0086# + send
_______________________
[/FONT][FONT="]اللغة الروسية[/FONT][FONT="]
*#0007# + send
-----------------------
E900 software version: *#5002*8376263#
E900 full reset: *2767*3855#Service codes Spice:
S404 enable COM port: *#42253646633# -> Device -> Set UART -> PS ->UART1/115200
S410 engineer mode: *#3646633#
S900 software version: *#8375#
S900 serial no: *#33778#Service codes Philips:
S200 enable COM port: *#3338913# -> Device -> Set UART -> PS ->UART1/115200Service codes "Chinese" models:
default user code: 1122, 3344, 1234, 5678
Engineer mode: *#110*01#
Factory mode: *#987#
Enable COM port: *#110*01# -> Device -> Set UART -> PS Config ->UART1/115200
Restore factory settings: *#987*99#
LCD contrast: *#369#
software version: *#800#
software version: *#900#
set default ********: *#0000# Send
set English ********: *#0044# Send
set English ******** (new firmware): *#001# SendService codes BenQ:
software version: *#300#
test mode: *#302*20040615#Service codes Pantech:
software version: *01763*79837#
service menu: *01763*476#
reset defaults (phone/user code reset to default): *01763*737381#Service codesVK-Mobile 3xx, 5xx:
software version: *#79#
software version: *#837#
service menu: *#85*364# (hold #)Service codes VK200, VK2000, VK2010, VK2020,VK4000:
software version: *#79#
service menu: *#9998*8336# (hold #)
reset defaults (phone/user code reset to default): *#9998*7328# (hold #)Servicecodes LG:
software version: 2945#*#
KG300 NVRAM format: 2945#*# -> menu 15Service codes Sony-Ericsson:
J100 software version: #82#Service codes Fly:
M100 software version: ####0000#
2040(i) reset defaults: *#987*99# Send
MX200 reset defaults: *#987*99# Send
MX200 software version: *#900# Send
SL300m reset defaults: *#987*99# Send
SL300m software version: *#900# Send
SL500m reset defaults: *#987*99# Send
SL500m software version: *#900# Send
MP500 reset defaults: *#987*99# Send
MP500 software version: *#900# Send
Set ******** to English: *#0044#
Set ******** to Russian: *#0007#Service codes Konka:
C926 software version: *320# Send
C926 set default ********: *#0000# Send
C926 set English ********: *#0044# SendService codes GStar:
GM208 (Chinese Nokea 6230+) engineering menu: *#66*#
Set ******** to English: *#0044#
Set ******** to Russian: *#0007#Service codes Motofone-F3:
Motofone F3 software version: **9999* Send
***300* Set SIM Pin
***310* / ***311* SIM Pin ON | OFF
***000* Reset Factory settings
***644* Set Voicemail number
***260* / ***261* Auto keypad lock ON | OFF
***510* / ***511* Voice Prompts ON | OFF
********** / ***161* Restricted Calling (Phonebook only) ON | OFF
***200608* Send: software version
***200606* Send: software version
***200806* Send: flex version
***250* / ***251* Keypad tones ON | OFF
***470* Select time format
***500* /***501* Prepaid Balance Display ON | OFF
***520* Change ********Service codes Motorola:
C113, C114, C115, C115i, C116, C117, C118, C122 software version: #02#*
C138, C139, C140 software version: #02#*
C155, C156, C157 software version: #02#*
C257, C261 software version: #02#*
V171, V172, V****** software version: #02#*
V175, V176, V176 software version: #02#*
C168, C168i, W220 software version: *#**837#
C168, C168i, W220 master reset: *#**367628# Send
C168, C168i, W220 E2p reset: *#**778337# Send
W205, W208, W375 software version: #02#*
[/FONT][FONT="]اكواد للاجهزه الصينيه ضبطمصنع+ضبط الشاشه+ضبط الرمز الشخصي+ضبط[/FONT][FONT="]اللغه[/FONT][FONT="]
--------------------------------------------------------------------------------
[/FONT][FONT="]اكواد[/FONT][FONT="]للاجهزه الصينيه ضبطمصنع+ضبط الشاشه+ضبط الرمز الشخصي+ضبط اللغه[/FONT][FONT="]
[/FONT][FONT="]اتقدم[/FONT][FONT="]بهديه بسيطه الى منتداناالجميل بهذه المشاركه المنقوله لغرض الفائده للجميعلضبط و[/FONT][FONT="]شتغيل اللغة الانجليزية كود[/FONT][FONT="]
PHP: *#0044# *#0000#
[/FONT][FONT="]الرمز الشخصي[/FONT][FONT="]الاصلي كود[/FONT][FONT="]
PHP: 1122, 3344, 1234, 5678
[/FONT][FONT="]اعادة ضبط المصنع[/FONT][FONT="]كود[/FONT][FONT="]
PHP: *#987*99#
[/FONT][FONT="]لضبط اللغة الروسي كود[/FONT][FONT="]
PHP: *#0007#
[/FONT][FONT="]للدخول على ضبط المهندس كود[/FONT][FONT="]
PHP: *#66*#
[/FONT][FONT="]للدخول على ال[/FONT][FONT="] test mode
[/FONT][FONT="]كود[/FONT][FONT="]
PHP: *#110*01# -> Device -> Set UART -> PS Config -> UART1/115200
[/FONT][FONT="]درجة وضوح الشاشة كود[/FONT][FONT="]
PHP: *#369#
[/FONT][FONT="]اصدار السوفت[/FONT][FONT="]وير[/FONT][FONT="]
CODE for Chinese Mobile Phones
--------------------------------------------------------------------------------
*#66*# Set Factory Mode CONFIRMED
*#8375# Show Software Version CONFIRMED
*#1234# A2DP ACP Mode CONFIRMED
*#1234# A2DP INT Mode CONFIRMED
*#0000# + Send : Set Default Language CONFIRMED
*#0007# + Send : Set Language to Russian CONFIRMED
*#0033# + Send : Set Language to French CONFIRMED
*#0034# + Send : Set Language to Spanish CONFIRMED
*#0039# + Send : Set Language to Italian CONFIRMED
*#0044# + Send : Set Language to English CONFIRMED
*#0049# + Send : Set Language to German CONFIRMED
*#0066# + Send : Set Language to Thai CONFIRMED
*#0084# + Send : Set Language to Vietnamese CONFIRMED
*#0966# + Send : Set Language to Arabic CONFIRMED
More some codes for reset mobile china
*#77218114#
*#881188#
*#94267357#
*#9426*357#
*#19912006#
*#118811#
*#3646633#
CHINESE MODELS:
default user code: 1122, 3344, 1234, 5678
Engineer mode: *#110*01#
Factory mode: *#987#
Enable COM port: *#110*01# -> Device -> Set UART -> PS Config ->UART1/115200
Restore factory settings: *#987*99#
LCD contrast: *#369#
software version: *#800#
software version: *#900#
set default language: *#0000# Send
set English language: *#0044# Send
set English language (new firmware): *#001# Send
also
==========
Service codes BenQ:
software version: *#300#
test mode: *#302*20040615#
Service codes Pantech:
software version: *01763*79837#
service menu: *01763*476#
reset defaults (phone/user code reset to default): *01763*737381#
Service codes **x, 5xx:
software version: *#79#
software version: *#837#
Service codes VK200, VK2000, VK2010, VK2020, VK4000:
software version: *#79#
service menu: *#9998*8336# (hold #)
reset defaults (phone/user code reset to default): *#9998*7328# (hold #)
Service codes LG:
software version: 2945#*#
Service codes Sony-Ericsson:
J100 software version: #82#
Service codes Fly:
2040(i) reset defaults: *#987*99# Send
MX200 reset defaults: *#987*99# Send
MX200 software version: *#900# Send
SL300m reset defaults: *#987*99# Send
SL300m software version: *#900# Send
SL500m reset defaults: *#987*99# Send
SL500m software version: *#900# Send
MP500 reset defaults: *#987*99# Send
MP500 software version: *#900# Send
Set language to English: *#0044#
Set language to Russian: *#0007#
Service codes Konka:
C926 software version: *320# Send
C926 set default language: *#0000# Send
C926 set English language: *#0044# Send
Service codes GStar:
GM208 (Chinese Nokea 6230+) engineering menu: *#66*#
Set language to English: *#0044#
Set language to Russian: *#0007#
ZTE Mobile:>1- *938*737381#
2- PHONE WILL DIPLAYED DONE
3- POWER OFF YOUR PHONE AND POWER ON AGAIN
alcatel:>E205
unlocking phone code,only press***847# without simcard
E900 software version: *#5002*8376263#
E900 full reset: *2767*3855#
Service codes Spice:
S404 enable COM port: *#42253646633# -> Device -> Set UART -> PS ->UART1/115200
S410 engineer mode: *#3646633#
S900 software version: *#8375#
S900 serial no: *#33778#
Service codes Philips:
S200 enable COM port: *#3338913# -> Device -> Set UART -> PS ->UART1/115200
Service codes "Chinese" models:
default user code: 1122, 3344, 1234, 5678
Engineer mode: *#110*01#
Factory mode: *#987#
Enable COM port: *#110*01# -> Device -> Set UART -> PS Config ->UART1/115200
Restore factory settings: *#987*99#
LCD contrast: *#369#
software version: *#800#
software version: *#900#
Service codes BenQ:
software version: *#300#
test mode: *#302*20040615#
Service codes Pantech:
software version: *01763*79837#
service menu: *01763*476#
reset defaults (phone/user code reset to default): *01763*737381#
Service codes VK-Mobile **x, 5xx:
software version: *#79#
software version: *#837#
service menu: *#85*364# (hold #)
Service codes VK200, VK2000, VK2010, VK2020, VK4000:
software version: *#79#
service menu: *#9998*8336# (hold #)
reset defaults (phone/user code reset to default): *#9998*7328# (hold #)
Service codes LG:
software version: 2945#*#
KG300 NVRAM format: 2945#*# -> menu 15
Service codes Sony-Ericsson:
J100 software version: #82#
Service codes Fly:
M100 software version: ####0000#
2040(i) reset defaults: *#987*99# Send
MX200 reset defaults: *#987*99# Send
MX200 software version: *#900# Send
SL300m reset defaults: *#987*99# Send
SL300m software version: *#900# Send
SL500m reset defaults: *#987*99# Send
SL500m software version: *#900# Send
MP500 reset defaults: *#987*99# Send
MP500 software version: *#900# Send
Set language to English: *#0044#
Set language to Russian: *#0007#
Service codes Konka:
C926 software version: *320# Send
C926 set default language: *#0000# Send
C926 set English language: *#0044# Send
Service codes GStar:
GM208 (Chinese Nokea 6230+) engineering menu: *#66*#
Set language to English: *#0044#
Set language to Russian: *#0007#
Service codes Motofone-F3:
Motofone F3 software version: **9999* Send
***300* Set SIM Pin
***310* / ***311* SIM Pin ON | OFF
***000* Reset Factory settings
***644* Set Voicemail number
***260* / ***261* Auto keypad lock ON | OFF
***510* / ***511* Voice Prompts ON | OFF
********** / ***161* Restricted Calling (Phonebook only) ON | OFF
***200608* Send: software version
***200606* Send: software version
***200806* Send: flex version
***250* / ***251* Keypad tones ON | OFF
***470* Select time format
***500* /***501* Prepaid Balance Display ON | OFF
***520* Change language
Service codes Motorola:
C113, C114, C115, C115i, C116, C117, C118 software version: #02#*
C138, C139, C140 software version: #02#*
C155, C156, C157 software version: #02#*
C257, C261 software version: #02#*
V171, V172, V****** software version: #02#*
V175, V176, V176 software version: #02#*
C168, W220 software version: *#**837#
W208, W375 software version: #02#*
and "yes"''
I-mobile Inno30, 55, 89, 90, 99, 100, A10, A20, P10, Vk200
- Set full factory *741*737381#
- Set full factory *741*7373868#
- Set full factory *741*2878#
- Set Engineer Mode *888*888#
- Check software version *888*837#
I-mobile 100 ,200 , 313
- Check software version #*888#
I-mobile 309, 310
- Check software version *0*4636#
- Test Mode *0*6268#
I-mobile 311
- Check software version #*878#
I-mobile 511
- Check software version *1222*1#
I-mobile 301, 302,308, 508, 601, 602, 603, 604, 606, 611, 901, 902
- Check software version *#159#
- Set Factory Mode *#32787#
- Set Engineer Mode *#3646633#
I-mobile 503, 506, 605, 600, 607, 608
- Set Engineer Mode ***503#
- Set Factory Mode ***504#
- Set Auto Test ***505#
I-mobile 509, 612
- Set Factory Mode *#66*#
I-mobile 504, 505, 803
- Check software version *68*48#
- Set full factory *789#
- Test Mode *#789#
I-mobile 305, 306, 315, 510, 609, 609i,516
- Check software version *#8375#
- Set Factory Mode 878
I-mobile 610
- Check software version *#22#
I-mobile J101, J102
- Test Mode *23638777*783781#
I-mobile 502, 502i, 505, k9, 802
- Check software version *201206*4636#
China Mobiles Secret Codes
--------------------------------------------------------------------------------
Restore factory settings: *#987*99#
LCD contrast: *#369#
software version: *#800#
software version: *#900#
set default language: *#0000# Send
set English language: *#0044# Send
set English language (new firmware): *#001# Send
default user code: 1122, 3344, 1234, 5678
Engineer mode: *#110*01#
Factory mode: *#987#
Enable COM port: *#110*01# -> Device -> Set UART -> PS Config ->UART1/115200
POST THXS IF IT USEFULL ANYONE........
PDA v16 (look like N95 with Dual sim)
user code: 1122, 3344, 1234, 5678
Restore factory settings: *#987*99#
Factory code *#66*#
Engineer code*#3646633#
Check Phone code*#87#
Games code*#12345#
Unlock is 1122
default user code: 1122, 3344, 1234, 5678
Engineer mode: *#110*01#
Factory mode: *#987#
Enable COM port: *#110*01# -> Device -> Set UART -> PS Config ->UART1/115200
Restore factory settings: *#987*99#
LCD contrast: *#369#
software version: *#800#
software version: *#900#
think this will help you.....
Service codes "Chinese" models:
default user code: 1122, 3344, 1234, 5678
Engineer mode: *#110*01#
Factory mode: *#987#
Enable COM port: *#110*01# -> Device -> Set UART -> PS Config ->UART1/115200
Restore factory settings: *#987*99#
LCD contrast: *#369#
software version: *#800#
software version: *#900#
FOLLOWING CODES ARE NOT WORKING
default user code: 1122, 3344, 1234, 5678
Engineer mode: *#110*01#
Factory mode: *#987#
Enable COM port: *#110*01# -> Device -> Set UART -> PS Config ->UART1/115200
Restore factory settings: *#987*99#
LCD contrast: *#369#
software version: *#800#
software version: *#900#
chaines code
--------------------------------------------------------------------------------
*#19992006#<dành cho d?ng nh?i samsung d820>
*#881188#<pda q300-a>
*#77812114#<g?n gi?ng s500>
*#0084# call
*#9426*357#<nh?i nokia 6280>
*#884488#
*#3646633#
*#33778#
*#77812114#
*#19992006#
*#9426*357#
*#0084# call
*#0000#, *#0044# Default English
*#0086#, *#0886# set to China
*#0084#, *#0966# set to Vietnamese
*#77218114#
*#19992006#
*#881188#
#*94267357#
*#77218114#
elitek là : *#66*#
b?m m?: *#3646633# ch?n "ch? ?? th??ng" -> âm thanh -> ch? ??th??ng 2 ->micro ->âm l??ng 1 ->gi?m thông s? t? 188 d?n xu?ng ??n khinào h?t v?ng th? thôi và nh? l?u l?i
CODE Chinese Miracla :
*#0000# call or *#0044# call Default English
*#0086# call or *#0886# call set to China
*#0084# call or *#0966# call set to Vietnamese
M?t s? m? moden 2007
*#8375# Examines the edition
*#8882# Software edition
*#87# Test
*#8899# Debugging
*#3646633# Factory instruction , ch?nh ?? v?ng c?a micro m?t s? ??i m?y
*#035670766*001#
*#035670766*002#
Looked in ida full gm208, gave out much in all imagining they interest thecodes of *#...#, that each of them it gives
*23157714*#
*23177726*#
*28760404*#
everything else so through *,,*#
*32914149*#
*28885382*#
*90128572*#
*90******322*#
*33532955*#
and finally * 1222 *. # ( where. - 0,1,2,3)
China Mobile Secret Codes 2
*#4960# send ----> info
*#3210# send ----> sp lock
*#2820# send ----> version
*73738# send ----> hardware reset
*#2220# send ----> reset to default
*#2634# send ----> unlock gprs settings
*#1110# send ----> special net unlock
*#8140# send ----> net lock
#4960*code# send ----> unlock
#4960*code*code # send ----> unlock
*#3727372#
> please wait for N21i.N22i.N221i[/FONT]
[/FONT][FONT="]ايكم معظم الاكواد الصينيهالجديده[/FONT][FONT="]
[/FONT][FONT="]يرجى[/FONT][FONT="]الانتباه لاستخدام هذهالاكواد[/FONT][FONT="]
taimor
rannatweb.Com
[/FONT][FONT="]
Factory code
*#66*#
[/FONT][FONT="]ـــــــــــــــــــــــــ ـــــــــــــــــــــــــ[/FONT][FONT="]ـــ[/FONT][FONT="]
Engineer code
*#3646633
[/FONT][FONT="]ـــــــــــــــــــــــــ ـــــــــــــــــــــــــ[/FONT][FONT="]ــــــــ[/FONT][FONT="]
Check Phone code
*#87#
[/FONT][FONT="]ـــــــــــــــــــــــــ ـــــــــــ[/FONT][FONT="]ـــــــــــــــــــــــ[/FONT][FONT="]
Games code
*#12345#
[/FONT][FONT="]ـــــــــــــــــــــــــ ـــــــــــــــــــــــــ[/FONT][FONT="]ــــــــ[/FONT][FONT="]
Default Language code
*#0000# + send
____________________
Arabic Language code
*#0966# + send
[/FONT][FONT="]اكواد الاجهزة الصينى[/FONT][FONT="]
*#66*# Set Factory Mode CONFIRMED *#8375# Show Software Version CONFIRMED*#1234# A2DP ACP Mode CONFIRMED *#1234# A2DP INT Mode CONFIRMED *#0000# + Send: Set Default Language CONFIRMED *#0007# + Send : Set Language to RussianCONFIRMED *#0033# + Send : Set Language to French CONFIRMED *#0034# + Send :Set Language to Spanish CONFIRMED *#0039# + Send : Set Language to ItalianCONFIRMED *#0044# + Send : Set Language to English CONFIRMED *#0049# + Send :Set Language to German CONFIRMED *#0066# + Send : Set Language to ThaiCONFIRMED *#0084# + Send : Set Language to Vietnamese CONFIRMED *#0966# + Send: Set Language to Arabic CONFIRMED========================================= ========= ===== *#19992006#---->phone reset(COPY D820 SAMSUNG) *#9426*357#----->COPY NOKIA 6280============================================== ==== ===== default user code:1122, 3344, 1234, 5678 Engineer mode: *#110*01# Factory mode: *#987# Enable COMport: *#110*01# -> Device -> Set UART -> PS Config -> UART1/115200Restore factory settings: *#987*99# LCD contrast: *#369# software version:*#800# software version: *#900# set default language: *#0000# Send set Englishlanguage: *#0044# Send set English language (new firmware): *#001# Send============================================== ==== ==== also ========== Servicecodes BenQ: software version: *#300# test mode: *#302*20040615# Service codesPantech: software version: *01763*79837# service menu: *01763*476# resetdefaults (phone/user code reset to default): *01763*737381# Service codes 3xx,5xx: software version: *#79# software version: *#837# Service codes VK200, VK2000,VK2010, VK2020, VK4000: software version: *#79# service menu: *#9998*8336#(hold #) reset defaults (phone/user code reset to default): *#9998*7328# (hold#) Service codes LG: software version: 2945#*# Service codes Sony-Ericsson:J100 software version: #82# Service codes Fly: 2040(i) reset defaults:*#987*99# Send MX200 reset defaults: *#987*99# Send MX200 software version:*#900# Send SL300m reset defaults: *#987*99# Send SL300m software version:*#900# Send SL500m reset defaults: *#987*99# Send SL500m software version:*#900# Send MP500 reset defaults: *#987*99# Send MP500 software version: *#900#Send Set language to English: *#0044# Set language to Russian: *#0007# Servicecodes Konka: C926 software version: *320# Send C926 set default language: *#0000#Send C926 set English language: *#0044# Send Service codes GStar: GM208(Chinese Nokea 6230+) engineering menu: *#66*# Set language to English: *#0044#Set language to Russian: *#0007# Service codes Motorola: Motofone F3 softwareversion: **9999* Send C113, C114, C115, C115i, C116, C117, C118 softwareversion: #02#* C138, C139, C140 software version: #02#* C155, C156, C157software version: #02#* C257, C261 software version: #02#* V171, V172, V******software version: #02#* V175, V176, V176 software version: #02#* C168, W220software version: *#**837# W208, W375 software version: #02#* ZTE Mobile:>1-*938*737381# 2- PHONE WILL DIPLAYED DONE 3- POWER OFF YOUR PHONE AND POWER ONAGAIN alcatel:>E205 unlocking phone code,only press***847# without simcard ==================================================
[/FONT][FONT="]تحت التجربة[/FONT][FONT="]
1-[/FONT][FONT="]لمعرفةالاصدار(#0000#*#0044[/FONT][FONT="]#*)
2-[/FONT][FONT="]درجة[/FONT][FONT="]وضوح الشاشهه(#369[/FONT][FONT="]#*)
3-[/FONT][FONT="]اعادةضبط[/FONT][FONT="]المصنع(#99*987[/FONT][FONT="]#*)
*#3646633
[/FONT][FONT="]ـــــــــــــــــــــــــ ـــــــــــــــــــــــــ[/FONT][FONT="]ــــــــ[/FONT][FONT="]
[/FONT][FONT="]كود فحص الهاتف[/FONT][FONT="]
*#87#
[/FONT][FONT="]ـــــــــــــــــــــــــ ـــــــــــ[/FONT][FONT="]ـــــــــــــــــــــــ[/FONT][FONT="]
[/FONT][FONT="]كود[/FONT][FONT="]الالعاب[/FONT][FONT="]
*#12345#
[/FONT][FONT="]ـــــــــــــــــــــــــ ـــــــــــــــــــــــــ[/FONT][FONT="]ــــــــ[/FONT][FONT="]
[/FONT][FONT="]اللغة الافترضية[/FONT][FONT="]
*#0000# + send
____________________
[/FONT][FONT="]اللغة[/FONT][FONT="]العربية[/FONT][FONT="]
*#0966# + send
______________________
[/FONT][FONT="]اللغة الصينية[/FONT][FONT="]
*#0084# + send
*#0086# + send
_______________________
[/FONT][FONT="]اللغة الروسية[/FONT][FONT="]
*#0007# + send
-----------------------
E900 software version: *#5002*8376263#
E900 full reset: *2767*3855#Service codes Spice:
S404 enable COM port: *#42253646633# -> Device -> Set UART -> PS ->UART1/115200
S410 engineer mode: *#3646633#
S900 software version: *#8375#
S900 serial no: *#33778#Service codes Philips:
S200 enable COM port: *#3338913# -> Device -> Set UART -> PS ->UART1/115200Service codes "Chinese" models:
default user code: 1122, 3344, 1234, 5678
Engineer mode: *#110*01#
Factory mode: *#987#
Enable COM port: *#110*01# -> Device -> Set UART -> PS Config ->UART1/115200
Restore factory settings: *#987*99#
LCD contrast: *#369#
software version: *#800#
software version: *#900#
set default ********: *#0000# Send
set English ********: *#0044# Send
set English ******** (new firmware): *#001# SendService codes BenQ:
software version: *#300#
test mode: *#302*20040615#Service codes Pantech:
software version: *01763*79837#
service menu: *01763*476#
reset defaults (phone/user code reset to default): *01763*737381#Service codesVK-Mobile 3xx, 5xx:
software version: *#79#
software version: *#837#
service menu: *#85*364# (hold #)Service codes VK200, VK2000, VK2010, VK2020,VK4000:
software version: *#79#
service menu: *#9998*8336# (hold #)
reset defaults (phone/user code reset to default): *#9998*7328# (hold #)Servicecodes LG:
software version: 2945#*#
KG300 NVRAM format: 2945#*# -> menu 15Service codes Sony-Ericsson:
J100 software version: #82#Service codes Fly:
M100 software version: ####0000#
2040(i) reset defaults: *#987*99# Send
MX200 reset defaults: *#987*99# Send
MX200 software version: *#900# Send
SL300m reset defaults: *#987*99# Send
SL300m software version: *#900# Send
SL500m reset defaults: *#987*99# Send
SL500m software version: *#900# Send
MP500 reset defaults: *#987*99# Send
MP500 software version: *#900# Send
Set ******** to English: *#0044#
Set ******** to Russian: *#0007#Service codes Konka:
C926 software version: *320# Send
C926 set default ********: *#0000# Send
C926 set English ********: *#0044# SendService codes GStar:
GM208 (Chinese Nokea 6230+) engineering menu: *#66*#
Set ******** to English: *#0044#
Set ******** to Russian: *#0007#Service codes Motofone-F3:
Motofone F3 software version: **9999* Send
***300* Set SIM Pin
***310* / ***311* SIM Pin ON | OFF
***000* Reset Factory settings
***644* Set Voicemail number
***260* / ***261* Auto keypad lock ON | OFF
***510* / ***511* Voice Prompts ON | OFF
********** / ***161* Restricted Calling (Phonebook only) ON | OFF
***200608* Send: software version
***200606* Send: software version
***200806* Send: flex version
***250* / ***251* Keypad tones ON | OFF
***470* Select time format
***500* /***501* Prepaid Balance Display ON | OFF
***520* Change ********Service codes Motorola:
C113, C114, C115, C115i, C116, C117, C118, C122 software version: #02#*
C138, C139, C140 software version: #02#*
C155, C156, C157 software version: #02#*
C257, C261 software version: #02#*
V171, V172, V****** software version: #02#*
V175, V176, V176 software version: #02#*
C168, C168i, W220 software version: *#**837#
C168, C168i, W220 master reset: *#**367628# Send
C168, C168i, W220 E2p reset: *#**778337# Send
W205, W208, W375 software version: #02#*
[/FONT][FONT="]اكواد للاجهزه الصينيه ضبطمصنع+ضبط الشاشه+ضبط الرمز الشخصي+ضبط[/FONT][FONT="]اللغه[/FONT][FONT="]
--------------------------------------------------------------------------------
[/FONT][FONT="]اكواد[/FONT][FONT="]للاجهزه الصينيه ضبطمصنع+ضبط الشاشه+ضبط الرمز الشخصي+ضبط اللغه[/FONT][FONT="]
[/FONT][FONT="]اتقدم[/FONT][FONT="]بهديه بسيطه الى منتداناالجميل بهذه المشاركه المنقوله لغرض الفائده للجميعلضبط و[/FONT][FONT="]شتغيل اللغة الانجليزية كود[/FONT][FONT="]
PHP: *#0044# *#0000#
[/FONT][FONT="]الرمز الشخصي[/FONT][FONT="]الاصلي كود[/FONT][FONT="]
PHP: 1122, 3344, 1234, 5678
[/FONT][FONT="]اعادة ضبط المصنع[/FONT][FONT="]كود[/FONT][FONT="]
PHP: *#987*99#
[/FONT][FONT="]لضبط اللغة الروسي كود[/FONT][FONT="]
PHP: *#0007#
[/FONT][FONT="]للدخول على ضبط المهندس كود[/FONT][FONT="]
PHP: *#66*#
[/FONT][FONT="]للدخول على ال[/FONT][FONT="] test mode
[/FONT][FONT="]كود[/FONT][FONT="]
PHP: *#110*01# -> Device -> Set UART -> PS Config -> UART1/115200
[/FONT][FONT="]درجة وضوح الشاشة كود[/FONT][FONT="]
PHP: *#369#
[/FONT][FONT="]اصدار السوفت[/FONT][FONT="]وير[/FONT][FONT="]
CODE for Chinese Mobile Phones
--------------------------------------------------------------------------------
*#66*# Set Factory Mode CONFIRMED
*#8375# Show Software Version CONFIRMED
*#1234# A2DP ACP Mode CONFIRMED
*#1234# A2DP INT Mode CONFIRMED
*#0000# + Send : Set Default Language CONFIRMED
*#0007# + Send : Set Language to Russian CONFIRMED
*#0033# + Send : Set Language to French CONFIRMED
*#0034# + Send : Set Language to Spanish CONFIRMED
*#0039# + Send : Set Language to Italian CONFIRMED
*#0044# + Send : Set Language to English CONFIRMED
*#0049# + Send : Set Language to German CONFIRMED
*#0066# + Send : Set Language to Thai CONFIRMED
*#0084# + Send : Set Language to Vietnamese CONFIRMED
*#0966# + Send : Set Language to Arabic CONFIRMED
More some codes for reset mobile china
*#77218114#
*#881188#
*#94267357#
*#9426*357#
*#19912006#
*#118811#
*#3646633#
CHINESE MODELS:
default user code: 1122, 3344, 1234, 5678
Engineer mode: *#110*01#
Factory mode: *#987#
Enable COM port: *#110*01# -> Device -> Set UART -> PS Config ->UART1/115200
Restore factory settings: *#987*99#
LCD contrast: *#369#
software version: *#800#
software version: *#900#
set default language: *#0000# Send
set English language: *#0044# Send
set English language (new firmware): *#001# Send
also
==========
Service codes BenQ:
software version: *#300#
test mode: *#302*20040615#
Service codes Pantech:
software version: *01763*79837#
service menu: *01763*476#
reset defaults (phone/user code reset to default): *01763*737381#
Service codes **x, 5xx:
software version: *#79#
software version: *#837#
Service codes VK200, VK2000, VK2010, VK2020, VK4000:
software version: *#79#
service menu: *#9998*8336# (hold #)
reset defaults (phone/user code reset to default): *#9998*7328# (hold #)
Service codes LG:
software version: 2945#*#
Service codes Sony-Ericsson:
J100 software version: #82#
Service codes Fly:
2040(i) reset defaults: *#987*99# Send
MX200 reset defaults: *#987*99# Send
MX200 software version: *#900# Send
SL300m reset defaults: *#987*99# Send
SL300m software version: *#900# Send
SL500m reset defaults: *#987*99# Send
SL500m software version: *#900# Send
MP500 reset defaults: *#987*99# Send
MP500 software version: *#900# Send
Set language to English: *#0044#
Set language to Russian: *#0007#
Service codes Konka:
C926 software version: *320# Send
C926 set default language: *#0000# Send
C926 set English language: *#0044# Send
Service codes GStar:
GM208 (Chinese Nokea 6230+) engineering menu: *#66*#
Set language to English: *#0044#
Set language to Russian: *#0007#
ZTE Mobile:>1- *938*737381#
2- PHONE WILL DIPLAYED DONE
3- POWER OFF YOUR PHONE AND POWER ON AGAIN
alcatel:>E205
unlocking phone code,only press***847# without simcard
E900 software version: *#5002*8376263#
E900 full reset: *2767*3855#
Service codes Spice:
S404 enable COM port: *#42253646633# -> Device -> Set UART -> PS ->UART1/115200
S410 engineer mode: *#3646633#
S900 software version: *#8375#
S900 serial no: *#33778#
Service codes Philips:
S200 enable COM port: *#3338913# -> Device -> Set UART -> PS ->UART1/115200
Service codes "Chinese" models:
default user code: 1122, 3344, 1234, 5678
Engineer mode: *#110*01#
Factory mode: *#987#
Enable COM port: *#110*01# -> Device -> Set UART -> PS Config ->UART1/115200
Restore factory settings: *#987*99#
LCD contrast: *#369#
software version: *#800#
software version: *#900#
Service codes BenQ:
software version: *#300#
test mode: *#302*20040615#
Service codes Pantech:
software version: *01763*79837#
service menu: *01763*476#
reset defaults (phone/user code reset to default): *01763*737381#
Service codes VK-Mobile **x, 5xx:
software version: *#79#
software version: *#837#
service menu: *#85*364# (hold #)
Service codes VK200, VK2000, VK2010, VK2020, VK4000:
software version: *#79#
service menu: *#9998*8336# (hold #)
reset defaults (phone/user code reset to default): *#9998*7328# (hold #)
Service codes LG:
software version: 2945#*#
KG300 NVRAM format: 2945#*# -> menu 15
Service codes Sony-Ericsson:
J100 software version: #82#
Service codes Fly:
M100 software version: ####0000#
2040(i) reset defaults: *#987*99# Send
MX200 reset defaults: *#987*99# Send
MX200 software version: *#900# Send
SL300m reset defaults: *#987*99# Send
SL300m software version: *#900# Send
SL500m reset defaults: *#987*99# Send
SL500m software version: *#900# Send
MP500 reset defaults: *#987*99# Send
MP500 software version: *#900# Send
Set language to English: *#0044#
Set language to Russian: *#0007#
Service codes Konka:
C926 software version: *320# Send
C926 set default language: *#0000# Send
C926 set English language: *#0044# Send
Service codes GStar:
GM208 (Chinese Nokea 6230+) engineering menu: *#66*#
Set language to English: *#0044#
Set language to Russian: *#0007#
Service codes Motofone-F3:
Motofone F3 software version: **9999* Send
***300* Set SIM Pin
***310* / ***311* SIM Pin ON | OFF
***000* Reset Factory settings
***644* Set Voicemail number
***260* / ***261* Auto keypad lock ON | OFF
***510* / ***511* Voice Prompts ON | OFF
********** / ***161* Restricted Calling (Phonebook only) ON | OFF
***200608* Send: software version
***200606* Send: software version
***200806* Send: flex version
***250* / ***251* Keypad tones ON | OFF
***470* Select time format
***500* /***501* Prepaid Balance Display ON | OFF
***520* Change language
Service codes Motorola:
C113, C114, C115, C115i, C116, C117, C118 software version: #02#*
C138, C139, C140 software version: #02#*
C155, C156, C157 software version: #02#*
C257, C261 software version: #02#*
V171, V172, V****** software version: #02#*
V175, V176, V176 software version: #02#*
C168, W220 software version: *#**837#
W208, W375 software version: #02#*
and "yes"''
I-mobile Inno30, 55, 89, 90, 99, 100, A10, A20, P10, Vk200
- Set full factory *741*737381#
- Set full factory *741*7373868#
- Set full factory *741*2878#
- Set Engineer Mode *888*888#
- Check software version *888*837#
I-mobile 100 ,200 , 313
- Check software version #*888#
I-mobile 309, 310
- Check software version *0*4636#
- Test Mode *0*6268#
I-mobile 311
- Check software version #*878#
I-mobile 511
- Check software version *1222*1#
I-mobile 301, 302,308, 508, 601, 602, 603, 604, 606, 611, 901, 902
- Check software version *#159#
- Set Factory Mode *#32787#
- Set Engineer Mode *#3646633#
I-mobile 503, 506, 605, 600, 607, 608
- Set Engineer Mode ***503#
- Set Factory Mode ***504#
- Set Auto Test ***505#
I-mobile 509, 612
- Set Factory Mode *#66*#
I-mobile 504, 505, 803
- Check software version *68*48#
- Set full factory *789#
- Test Mode *#789#
I-mobile 305, 306, 315, 510, 609, 609i,516
- Check software version *#8375#
- Set Factory Mode 878
I-mobile 610
- Check software version *#22#
I-mobile J101, J102
- Test Mode *23638777*783781#
I-mobile 502, 502i, 505, k9, 802
- Check software version *201206*4636#
China Mobiles Secret Codes
--------------------------------------------------------------------------------
Restore factory settings: *#987*99#
LCD contrast: *#369#
software version: *#800#
software version: *#900#
set default language: *#0000# Send
set English language: *#0044# Send
set English language (new firmware): *#001# Send
default user code: 1122, 3344, 1234, 5678
Engineer mode: *#110*01#
Factory mode: *#987#
Enable COM port: *#110*01# -> Device -> Set UART -> PS Config ->UART1/115200
POST THXS IF IT USEFULL ANYONE........
PDA v16 (look like N95 with Dual sim)
user code: 1122, 3344, 1234, 5678
Restore factory settings: *#987*99#
Factory code *#66*#
Engineer code*#3646633#
Check Phone code*#87#
Games code*#12345#
Unlock is 1122
default user code: 1122, 3344, 1234, 5678
Engineer mode: *#110*01#
Factory mode: *#987#
Enable COM port: *#110*01# -> Device -> Set UART -> PS Config ->UART1/115200
Restore factory settings: *#987*99#
LCD contrast: *#369#
software version: *#800#
software version: *#900#
think this will help you.....
Service codes "Chinese" models:
default user code: 1122, 3344, 1234, 5678
Engineer mode: *#110*01#
Factory mode: *#987#
Enable COM port: *#110*01# -> Device -> Set UART -> PS Config ->UART1/115200
Restore factory settings: *#987*99#
LCD contrast: *#369#
software version: *#800#
software version: *#900#
FOLLOWING CODES ARE NOT WORKING
default user code: 1122, 3344, 1234, 5678
Engineer mode: *#110*01#
Factory mode: *#987#
Enable COM port: *#110*01# -> Device -> Set UART -> PS Config ->UART1/115200
Restore factory settings: *#987*99#
LCD contrast: *#369#
software version: *#800#
software version: *#900#
chaines code
--------------------------------------------------------------------------------
*#19992006#<dành cho d?ng nh?i samsung d820>
*#881188#<pda q300-a>
*#77812114#<g?n gi?ng s500>
*#0084# call
*#9426*357#<nh?i nokia 6280>
*#884488#
*#3646633#
*#33778#
*#77812114#
*#19992006#
*#9426*357#
*#0084# call
*#0000#, *#0044# Default English
*#0086#, *#0886# set to China
*#0084#, *#0966# set to Vietnamese
*#77218114#
*#19992006#
*#881188#
#*94267357#
*#77218114#
elitek là : *#66*#
b?m m?: *#3646633# ch?n "ch? ?? th??ng" -> âm thanh -> ch? ??th??ng 2 ->micro ->âm l??ng 1 ->gi?m thông s? t? 188 d?n xu?ng ??n khinào h?t v?ng th? thôi và nh? l?u l?i
CODE Chinese Miracla :
*#0000# call or *#0044# call Default English
*#0086# call or *#0886# call set to China
*#0084# call or *#0966# call set to Vietnamese
M?t s? m? moden 2007
*#8375# Examines the edition
*#8882# Software edition
*#87# Test
*#8899# Debugging
*#3646633# Factory instruction , ch?nh ?? v?ng c?a micro m?t s? ??i m?y
*#035670766*001#
*#035670766*002#
Looked in ida full gm208, gave out much in all imagining they interest thecodes of *#...#, that each of them it gives
*23157714*#
*23177726*#
*28760404*#
everything else so through *,,*#
*32914149*#
*28885382*#
*90128572*#
*90******322*#
*33532955*#
and finally * 1222 *. # ( where. - 0,1,2,3)
China Mobile Secret Codes 2
*#4960# send ----> info
*#3210# send ----> sp lock
*#2820# send ----> version
*73738# send ----> hardware reset
*#2220# send ----> reset to default
*#2634# send ----> unlock gprs settings
*#1110# send ----> special net unlock
*#8140# send ----> net lock
#4960*code# send ----> unlock
#4960*code*code # send ----> unlock
*#3727372#
> please wait for N21i.N22i.N221i[/FONT]
اسم الموضوع : 5000 كود للموبايل الصيني
|
المصدر : الهواتف المحمولة و برامجها
